Backyard Family Bicycle Child Seat Rain Cover Rear Mount

Brand name
Chou Chou Poche

Product Name
Bicycle Child Seat Rain Cover Rear Mount

Product Description
・Water-repellent processed rain cover for rear child seat.
Convenient for pick-up and drop-off at kindergarten and nursery on rainy days!
(※This is exclusively for bicycle rear child seats with head support. It may not be compatible with some special models.)
・Transparent cover on the front ・The side covers can be opened to fully open from three directions. The side covers open wide down to the feet, making it easy to get in and out!
• The seams are treated with waterproof tape, preventing rain from entering through the seams.
- The vents placed in 4 locations keep it comfortable even on stuffy hot days.
The mesh windows on both sides can be opened and closed, allowing for good ventilation, making it安心 even during the season when heatstroke is a concern.
・The large front window provides a good view for children◎
・Unisex colors that are easy for men to use♪

material
[Main Body] 100% Polyester (Water Repellent Treatment), Polyvinyl Chloride Resin
[Front cover transparent part] Polyvinyl chloride resin

Country of Origin
China

Size
[Front Height] approximately 103m / [Back Height] approximately 69cm / [Width] approximately 39cm
[Top Depth] approximately 27cm / [Side Depth] maximum: approximately 47cm

*The size is the actual measurement when laid flat. There may be slight discrepancies between the actual product and the manufacturer's stated size. Thank you for your understanding in advance.

weight
approximately 470g

Usage
[取付方法]
1. Always have your child wear a helmet, and secure the head support of the child seat at the highest position.
2. Open the zipper on the outside of the cover and attach the cover's rubber band to the head support.
* The head support integrated type cannot have a rubber band attached. Please tie it to the hole above the head support with the string in the center of the cover. However, models without holes cannot be tied. Please be careful as the cover may easily fall off when children are getting in and out.
3. Please cover the entire child seat with the cover.
4. Please tie the fixed cord at the front to the base of the saddle or somewhere on the bicycle frame. If there is excess cord, please tie it up to shorten it so that it does not get caught in the wheels.
5. Please close the outer zipper and adjust the cover of the step section.
*If there is sagging in the cover section, please adjust the cord lock located on the back. After adjustment, if the rubber hangs down too long, please tie it to shorten.

[How to use W fastener (waterproof)]
*Before driving, please check that all zippers are not half-open and make sure to close them securely before driving.
1. When fully opening to the hem: Please raise both zipper liners all the way to the top.
2. When opening without removing the hem: It opens by lowering the liner of the upper zipper.

Points to note
※This is a special rain cover for bicycle rear child seats with head support, designed for transporting your child. Please do not use it for other purposes.
*Bicycles with rear tires 23 inches or smaller may have a risk of the hem getting caught due to the low frame, so please avoid using them.
*Opening and closing the cover while driving is dangerous, so please refrain from doing so.
*When using, please ensure there is a proper space between the child's face or head and the product to avoid creating a situation where the child has difficulty breathing.
*Please avoid use when there is a risk of high temperatures inside the cover, such as during midsummer days or under the blazing sun, and also when temperatures may rise after rain.
*Please do not leave your child inside the cover and step away from the bicycle, even for a short time.
*Please install this product in a location where safety can be ensured.
※The cover has ventilation openings that allow air to enter while in motion, but when stopped, adequate airflow cannot be ensured. Please regularly check on your child and pay attention to ventilation and hydration.
*Do not use with the head support in a low position. It is very dangerous as there will not be adequate space between the child and the cover.
*If the cover is not properly attached or if the zipper is partially open, there is a risk that the bottom of the cover may get caught in the wheels.
*When this product is installed, the handling operation will differ from before installation, so please check the operating feel and use it safely.
*Please do not use it when it is windy or near busy roads where it may be dangerous.
*This product is a sewn item and is not completely waterproof. Depending on the usage conditions, water may seep in through the seams, ventilation holes, or zipper areas.
*Please do not leave it in environments such as under the blazing sun or exposed to rain for long periods. Durability may be compromised by natural phenomena such as ultraviolet rays and acid rain.
*Do not bring flammable or high-temperature items close to this product. It may catch fire or melt.
*Please be careful to store it in a place where small children cannot wear it and play with it.
*Please be careful not to damage the cover with sharp objects, protrusions, or scratches from the basket.
*Please be aware that due to natural light and lighting, there is a possibility of discoloration and fading of the cover body even with normal use.
*Please ensure that children get on and off the bicycle with the assistance of an adult from the left side.
*Please wash off dirt with water or lukewarm water. Avoid using a washing machine or scrubbing. In particular, the transparent window is prone to scratches, so please do not rub it strongly.
*After getting wet, please air dry naturally in a shaded, well-ventilated area.
*Please do not store while wet. This may cause mold growth or color fading.
*Due to the nature of cameras and monitors, there may be differences in color between the image and the actual product, so we appreciate your understanding.

*Please note that it is not completely waterproof.